beautypg.com

1 cpu level up �auto, 2 sync mode �enabled, 3 ai overclock tuner �auto – Asus Rampage III Extreme User Manual

Page 96: 4 cpu ratio setting �auto

background image

3-10

Chapter 3: BIOS setup

3.3.1

CPU Level Up �Auto�

Allows you to select a CPU level, and the related parameters will be automatically
adjusted according to the selected CPU level. If you want to manually configure the
settings in detail, set

Ai Overclock Tuner to [Manual] after selecting a CPU level.

Configuration options: [Auto] [i3-530-2.93G] [i3-540-3.06G] [i5-650-3.2G]

3.3.2

Sync Mode �Enabled�

Allows you to enable or disable Sync Mode.
Configuration options: [Enabled] [Disabled]

3.3.3

Ai Overclock Tuner �Auto�

Allows selection of CPU overclocking options to achieve desired CPU internal
frequency. Select either one of the preset overclocking configuration options:

Manual

Allows you to individually set overclocking parameters.

Auto

Loads the optimal settings for the system.

X.M.P.

If you install memory module(s) supporting the eXtreme
Memory Profile (X.M.P.) Technology, choose this item to set the
profile(s) supported by your memory module(s) for optimizing
the system performance.

CPU Level Up

Allows you to select a CPU level, and the related parameters
will be adjusted automatically.

ROG Memory Profile

Allows you to select a memory profile.

eXtreme Memory Profile [Speedy]

This item appears only when you set the

Ai Overclock Tuner item to [X.M.P.] and

allows you to select the X.M.P. mode supported by your memory module.
Configuration options: [High Performance] [High Frequency]

ROG Memory Profile [Disabled]

This item appears only when you set the

Ai Overclock Tuner item to [ROG

Memory Profile] and allows you to select the X.M.P. mode supported by your
memory module. Configuration options: [Speedy] [Flying] [Lighting]

This item may cause system unstable. Select a memory profile and the DDR
timing will adjusted automatically.

3.3.4

CPU Ratio Setting �Auto�

Allows you to adjust the ratio between CPU Core Clock and FSB Frequency.
Use the <+> and <-> keys to adjust the value. The valid value ranges differently

The valid value ranges differently

according to your CPU model.