3 onboard devices configuration, High definition audio [enabled, Jmicron 36x ata controller �ide mode – Asus Rampage III Extreme User Manual
Page 112: Marvell lan �enabled, Onboard 1394 controller �enabled

3-26
Chapter 3: BIOS setup
3.5.3
Onboard Devices Configuration
High Definition Audio [Enabled]
[Enabled]
Enables the High Definition Audio Controller.
[Disabled]
Disables the controller.
Front Panel Type [HD Audio]
[AC97]
Set the front panel audio connector (AAFP) mode to legacy AC’97
[HD Audio] Set the front panel audio connector (AAFP) mode to high-
definition audio.
SPDIF OUT Mode Setting [SPDIF]
[SPDIF] Set the SPDIF OUT mode to SPDIF.
[HDMI]
Set the SPDIF OUT mode to HDMI.
JMicron 36x ATA Controller �IDE Mode�
[Disabled]
Disables the J-Micron controller.
[IDE Mode]
Set to [IDE Mode] when you want to use the Serial ATA hard disk
drives as Parallel ATA physical storage devices.
Marvell LAN �Enabled�
[Enabled]
Enables Marvell LAN Controller.
[Disabled]
Disables Marvell LAN Controller.
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item(s).
[Disabled] Disables Marvell LAN Boot ROM.
[Enabled] Enables Marvell LAN Boot ROM.
Onboard 1394 Controller �Enabled�
[Enabled]
Enables the onboard 1394 Controller.
[Disabled]
Disables the controller.
Rampage III Extreme BIOS SETUP
Version 0261
Advanced
Onboard Device Configuration
Onboard Device
[Standard]
High Definition Audio
[Enabled]
Front Panel Type
[HD Audio]
SPDIF OUT Mode Setting
[SPDIF]
JMicron 36x ATA Controller
[IDE Mode]
Marvell LAN
[Enabled]
LAN Boot ROM
[Disabled]
Onboard 1394 Controller
[Enabled]
Marvell 9123 Controller
[IDE Mode]
Onboard USB 3.0 Controller
[Enabled]
Get your best
overclocking record!
“Onboard Device” is
to disable all the
unnecessary devices
when you want to reach
your best overclocking
record. But it will
keep 1 lan port alive
to submit your score.