Asus Rampage III Extreme - Manual (Page 95)

ROG Rampage III Extreme 3-9
3.3 Extreme Tweaker menu
The Extreme Tweaker menu items allow you to configure overclocking-related
items.
Take caution when changing the settings of the Extreme Tweaker menu items.
Incorrect field values can cause the system to malfunction.
The default values of the following items vary depending on the CPU and
memory modules you install on the motherboard.
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Rampage III Extreme BIOS SETUP Version 0261
Extreme Tweaker Main Advanced Power Boot Tools Exit
Sync mode
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Configure System Performance Settings
Target CPU Frequency: 2793MHZ
Target DRAM Frequency: 1066MHZ
LN2 Mode: Disabled
CPU Level Up [Auto]
-------------------------------------------------
Sync mode [Enabled]
Ai Overclock Tuner [Auto]
CPU Ratio Status:(Min:12, Max:22)
CPU Ratio Setting [Auto]
CPU Turbo Power Limit [Disable]
CPU Configuration
DRAM Frequency [Auto]
UCLK Frequency [Auto]
QPI Link Data Rate [Auto]
DRAM Timing Control
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
CPU Differential Amplitude [Auto]
CPU Clock Skew [Auto]
IOH Clock Skew [Auto]
------------ Extreme Engine Digi+ ------------
Digi+ PWR Mode [T-Balanced]
PWM Volt. Control [Auto]
Load-Line Calibration [Auto]
CPU Voltage OCP [Auto]
CPU PWM Frequency [Auto]
--- Please key in numbers or select voltage!---
Extreme OV [Disabled]
CPU Temperature: 53˚C/127˚F
CPU Voltage Control [Absolute (VID)]
CPU Voltage 1.230 [Auto]
CPU PLL Voltage 1.812 [Auto]
QPI Loadline Calibration [Auto]
QPI/DRAM Core Voltage 1.151 [Auto]
IOH/ICH Temperature: 47˚C/116.5˚F 61˚C/141.5˚F
IOH Voltage 1.111 [Auto]
IOH PCIE Voltage 1.508 [Auto]
ICH Voltage 1.111 [Auto]
ICH PCIE Voltage [Auto]
DRAM Bus Voltage 1.601 [Auto]
DRAM REF Voltages
******** Spread Spectrum Control ********
CPU Spread Spectrum [Auto]
PCIE Spread Spectrum [Auto]
Scroll down to display the following items: