Asus P5KPL SE - Manual (Page 53)

ASUS P5KPL SE 2-15
Vanderpool.Technology.[Enabled]
Enables or disables Intel ® Vanderpool Technology. Vanderpool enhanced by Intel ®
Vanderpool Technology allows a platform to run multiple operating systems and applications
in independent partitions. With vanderpool, one computer system can function as multiple
virtual systems. Configuration options: [Enabled] [Disabled]
CPU.TM.Function.[Enabled]
Enables or disables Intel ® CPU Thermal Monitor (TM) function, a CPU overheating protection
function. When enabled, the CPU core frequency and voltage are reduced when the CPU
overheats. Configuration options: [Disabled] [Enabled]
Execute.Disable.Bit.[Enabled]
Enables or disables Intel ® Execute Disable Bit function. This function enhance protection
of your computer, reducing exposure to viruses and malicious buffer overflow attacks when
working with its supporting software and system.Configuration options: [Disabled] [Enabled]
Intel.(R).SpeedStep.Technology.[Enabled]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When set to [Enabled], you
can adjust the system power settings in the operating system to use the EIST feature. Set
this item to [Disabled] if you do not want to use the EIST. Configuration options: [Enabled]
[Disabled]
2.4.4. Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press to display the sub-menu.
North Bridge Configuration
Memory.Remap.Feature.[Disabled]
Allows you to enable or disable the remapping of overlapped PCI memory above the total
physical memory. We recommend that you set this item to Enabled.when you install 4GB
memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate.Graphic.Adapter.[PEG/PCI]
Allows you to select the graphics controller as the primary boot device.Configuration options:
[PCI/PEG] [PEG/PCI]
PEG Port Configuration
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Force x1.
Configuration options: [Enabled] [Disabled]
The following item appears only when you installed an Intel ® Pentium ® 4 or later CPU that
supports the Enhanced Intel SpeedStep ® Technology (EIST).