Asus P5KPL SE - Manual (Page 51)

ASUS P5KPL SE 2-13
The following item appears only when you set the AI Overclocking item to [Overclock
Profile].
Overclock Options [Overclock 5%]
Allows you to select the overclock options. Configuration options: [Overclock 5%]
[Overclock 10%] [Overclock 15%] [Overclock 20%] [Overclock 30%]
DRAM.Frequency.[Auto]
Allows you to set the DDR2 operating frequency. Configuration options: [Auto] [667 MHz]
[800 MHz] [1067 MHz]
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
FSB
DRAM.Frequency
Auto 667MHz 800MHz 960MHz 1000MHz 1067MHz 1110MHz 1200MHz
1600 • • • • •
1333 • • • • •
1066 • • • •
800 • • •
The DRAM Frequency options vary with different FSB value. Refer to the following table for
the DRAM Frequency options when the FSB value is 1600,1333, 1066, and 800.
Memory..Over.Voltage
Allows you to set the Memory Over Voltage. Use +/- to adjust the voltage. The increment is
0.00625V. The standard value is 1.85000V.
Configuration options: [Auto] [Min = 1.850000V] [Max = 2.24375V]
1.30V.Over.Voltage.[Auto]
Allows you to select MCH chipset voltage or set it to [Auto] for safe mode. Configuration
options: [Auto] [1.30V] [1.35V] [1.40V] [1.45V]
VTT_CPU.Over.Voltage.[Auto]
Allows you to select FSB termination voltage or set it to [Auto] for safe mode. Configuration
options: [Auto] [1.2V] [1.3V]
1.50V.Over.Voltage.[Auto]
Allows you to select ICH chipset voltage or set it to [Auto] for safe mode. Configuration
options: [Auto] [1.5V] [1.6V]
VCore.Over.Voltage.[Auto]
Allows you to select VCore over voltage or set it to [Auto] for safe mode. Configuration
options: [Auto] [+50mv] [+100mv] [+150mv]