Asus P8Z77-V PRO/THUNDERBOLT - Manual (Page 85)

ASUS P8Z77-V PRO/ THUNDERBOLT 3-9
Chapter 3
1-Core Ratio Limit [Auto]
Allows you to set the 1-Core Ratio Limit
[Auto] Select to apply the CPU default Turbo Ratio setting
[Manual] Select to to manually assign a 1-Core Ration Limit value that is higher
than or equal to the 2-Core Ratio Limit.
2-Core Ratio Limit [Auto]
Allows you to set the 2-Core Ratio Limit
[Auto] Select to apply the CPU default Turbo Ratio setting
[Manual] Select to to manually assign a 2-Core Ratio Limit value that is higher than
or equal to the 3-Core Ratio Limit. 1-Core Limit must not be set to [Auto]
3-Core Ratio Limit [Auto]
Allows you to set the 3-Core Ratio Limit
[Auto] Select to apply the CPU default Turbo Ratio setting
[Manual] Select to to manually assign a 3-Core Ratio Limit value that is higher than
or equal to the 4-Core Ratio Limit. 1-Core/2-Core Ratio Limit must not be
set to [Auto]
4-Core Ratio Limit [Auto]
Allows you to set the 4 Core Ratio Limit
[Auto] Select to apply the CPU default Turbo Ratio setting
[Manual] Select to to manually assign a 4-Core Ratio Limit value that is higher than
or equal to the 3-Core Ratio Limit. 1-Core/2-Core/3-Core Limit must not
be set to [Auto]
Internal PLL Overvoltage [Auto]
Allows you to set the internal PLL voltage.
Configuration options: [Auto] [Enabled] [Disabled]
CPU bus speed: DRAM speed ratio mode [Auto]
Allows you to set the CPU bus speed to DRAM speed ratio mode.
Configuration options: [Auto] [100:133] [100:100]
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the
BCLK/PCIE Frequency item settings.
iGPU Max. Frequency [Auto]
Use the <+> and <-> keys to adjust the value. The values range from 1150MHz to 3000MHz
with a 50MHz interval.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
OC Tuner
OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM for
enhancing the system performance. Configuration options: [OK] [Cancel]