Asus P2B98-XV - Manual (Page 14)

14 ASUS P2B98-XV User’s Manual
NOTES: Overclocking your processor is not recommended. It may result in a slower
speed. Voltage Regulator Output Selection (VID) is not needed for the Pentium II
processor because it sends a VID signal directly to the onboard power controller.
Set the jumpers by the Internal speed of your processor as follows:
(BUS Freq.) (Freq. Ratio)
CPU Model Freq. Ratio BUS F. FSB BF0 BF1 BF2 BF3
Intel Pentium II 450MHz 4.5x 100MHz [1-2] [1-2] [2-3] [1-2] [2-3]
Intel Pentium II 400MHz 4.0x 100MHz [1-2] [2-3] [2-3] [1-2] [2-3]
Intel Pentium II 350MHz 3.5x 100MHz [1-2] [1-2] [1-2] [2-3] [2-3]
Intel Pentium II 333MHz 5.0x 66MHz [2-3] [2-3] [1-2] [1-2] [2-3]
Intel Pentium II 300MHz 4.5x 66MHz [2-3] [1-2] [2-3] [1-2] [2-3]
Intel Pentium II 266MHz 4.0x 66MHz [2-3] [2-3] [2-3] [1-2] [2-3]
Intel Pentium II 233MHz 3.5x 66MHz [2-3] [1-2] [1-2] [2-3] [2-3]
WARNING! Frequencies above 100Mhz exceed the specifications for the on-
board Intel Chipset and are not guaranteed to be stable.
III. INSTALLATION
Jumpers
III. INST
ALLA
TION
3. CPU Bus Frequency (FSB)
This option tells the clock generator what frequency to send to the CPU, DRAM, and
440BX AGPset. This allows the selection of the CPU’s External frequency (or BUS
Clock). The BUS Clock multiplied by the BUS Ratio equals the CPU’s Internal fre-
quency (the advertised CPU speed).
4. CPU Core:BUS Frequency Multiple (BF0, BF1, BF2, BF3)
This option sets the frequency ratio between the Internal frequency of the CPU
and the CPU’s External frequency. These must be set in conjunction with the CPU
Bus Frequency.
CPU Bus Frequency
CPU Core:Bus Frequency Ratio
4.0x(4/1) 3.5x(7/2) 3.0x(3/1) 2.5x(5/2) 2.0x(2/1)
BF2
BF3
BF1
BF0
1 2 3
100MHz
1
2
3
66MHz
1
2
3
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
4.5x(9/2) 5.0x(5/1)
FSB FSB
P2B98-XV CPU Jumpers
Intel Pentium II Processor in an SEC cartridge
(233-450MHz 512KB/128KB/0KB L2 Cache)