Asus P2B98-XV - Manual (Page 13)

ASUS P2B98-XV User’s Manual 13
III. INSTALLATION
III. INST
ALLA
TION
Jumpers
1. Jumpers
1. Clear Real Time Clock (RTC) RAM (CLRTC)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer and uplug its AC power, (2) Short the two
solder points labeled CLRTC, (3) Turn on your computer, (4) Hold down lete> during bootup and enter BIOS setup to re-enter user preferences.
P2B98-XV Real Time Clock RAM (CLRTC)
Short the solder points to clear CMOS
2. VGA Interrupt Selection (INT)
These jumpers allow you to set the VGA interrupt method. The default disables
the chipset’s internal interrupt routing. Some video capture cards may require
that the interrupt be assigned by the onboard chipset.
P2B98-XV VGA Interrupt
Disabled
1
2
3
Enabled
1
2
3
INT INT