Asus CUEP2-M - Manual (Page 57)

ASUS CUEP2-M User’s Manual 57
4. BIOS SETUP
4. BIOS SETUP
4.4 Advanced Menu
Advanced
Menu
CPU Internal Frequency
In JumperFree™ Mode, this field allows you to select the internal frequency
of your CPU. Select [Manual] if you want to make changes to the subse-
quent 2 fields. Note that selecting a frequency higher than the CPU manu-
facturer recommends may cause the system to hang or crash. See System
Hangup on page 60.
CPU Frequency Multiple (When CPU Internal Frequency is set to [Manual])
This field is for unlocked processors only. If your processor’s Frequency
Multiple is detected locked, you will not be able to access this field. This
field sets the frequency multiple between the CPU’s internal frequency and
external frequency. In JumperFree™ Mode, when CPU Internal Frequency
is set to [Manual], this must be set in conjunction with FSB/SDRAM Freq.
(MHz) to match the internal frequency of your CPU. Configuration options
vary according to the external frequency of your CPU.
FSB:SDRAM:PCI Freq. Ratio (When CPU Internal Frequency is set to [Manual])
This field determines the frequency ratio among the Front Side Bus, SDRAM,
and PCI bus. You may set the memory clock frequency in synchronous or
asynchronous mode with respect to the Front Side Bus frequency. Configu-
ration options: [66:100:33] [100:100:33] [133:133:33]
[133:100:33]
FSB/SDRAM/PCI Freq. (MHz)
(When CPU Internal Frequency is set to [Manual])
According to the previous setup field FSB:SDRAM:PCI Freq.
Ratio, this field offers 32 sets of Front Side Bus, SDRAM, and
PCI bus frequencies for you to choose.
Available options
when FSB:SDRAM:PCI Freq. Ratio
is set to [133:133:33]