Asus CUEP2-M - Manual (Page 33)

ASUS CUEP2-M User’s Manual 33
3. HARDWARE SETUP
Connectors
3. H/W SETUP DMA Channels 3. H/W SETUP
8) Fast-Ethernet Port Connector (RJ-45) (optional)
The RJ-45 connector is optional at the time of purchase and is located on top of
the USB connectors. The connector allows the motherboard to connect to a Lo-
cal Area Network (LAN) through a network hub.
RJ45
9) Floppy Disk Drive Connector (34-1pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to the
floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta-
tion when using ribbon cables with pin 5 plugged).
CUEP2-M ®
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
CUEP2-M Floppy Disk Drive Connector
PIN 1
FLOPPY