Asus CUEP2-M - Manual (Page 66)

ASUS CUEP2-M User’s Manual 66
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
IRQ XX Reserved [No]
These fields indicate whether or not the displayed IRQ for each field is
being used by a specified device. The default value indicates that the dis-
played IRQ is not used. Configuration options: [No] [Yes]
PCI/PNP IRQ Resource Exclusion
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
Primary VGA BIOS [PCI Card]
If your computer has both PCI and AGP VGA cards, this field allows you to
select which of the cards will act as your primary graphics card. [AGP Card]
uses the AGP card as your primary card. The default, [PCI Card], allows
your PCI graphics card to take precedence when detected. Configuration
options: [PCI Card] [AGP Card]
Onboard LAN Boot ROM [Disabled]
When set to [Enabled], this field allows your computer to boot from the
network using the onboard LAN controller boot ROM. Configuration op-
tions: [Disabled] [Enabled]