Asus M5A99FX PRO R2.0 - Manual (Page 80)

3-8 Chapter 3: BIOS setup
Chapter 3
To change a user password:
1.
Select the User Password item and press .
2. From the Enter Current Password box, key in the current password, then press
.
3. From the Create New Password box, key in a new password, then press .
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
3.4 Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display other BIOS items.
Exit UEFI BIOS Utility - Advanced Mode
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
[D.O.C.P.] When DOCP is enabled CPU
Bus, CPU ratio and memory parameters
will be auto optimized.
Main Ai Tweaker Advanced Monitor Boot Tool
Current CPU Speed : 2600MHz
Target CPU Speed : 2600MHz
Current Memory Frequency: 1066MHz
Current NB Frequency : 2000MHz
Current HT Link Speed : 2000MHz
Ai Overclock Tuner Auto Auto
OC Tuner CANCEL
CPU Ratio Auto
Memory Frequency Auto
CPU/NB Frequency Auto
HT Link Speed Auto
CPU Spread Spectrum Auto
PCIe Spread Spectrum Auto
EPU Power Saving Mode Disabled
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen