beautypg.com

3 onboard device configuration, Onboard device configuration -29, Onboard devices [standard – Asus Maximus III Gene User Manual

Page 99: Hda controller [enabled, Realtek lan [enabled, Onboard 1394 controller [enabled, J-micron controller [ide mode

background image

ROG Maximus III GENE

3-29

3.5.3

Onboard Device Configuration

Onboard Devices [Standard]

[Standard]

Enables standard onboard devices.

[Disabled]

Disables all onboard devices except the LAN controller.

HDA Controller [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

Front Panel Type [HD Audio]

[AC97] Set the front panel audio connector (AAFP) mode to legacy AC’97
[HD Audio] Set the front panel audio connector (AAFP) mode to high-

definition audio.

Realtek LAN [Enabled]

[Enabled]

Enables Realtek LAN Controller.

[Disabled]

Disables Realtek LAN Controller.

LAN Boot ROM [Disabled]

This item appears only when you enable the previous item(s).
[Disabled] Disables Realtek LAN Boot ROM.
[Enabled] Enables Realtek LAN Boot ROM.

Onboard 1394 Controller [Enabled]

[Enabled]

Enables the onboard 1394 Controller.

[Disabled]

Disables the controller.

J-Micron Controller [IDE Mode]

[Disabled]

Disables the J-Micron controller.

[IDE Mode]

Set to [IDE Mode] when you want to use the Serial ATA hard disk

drives as Parallel ATA physical storage devices.

[AHCI Mode] Set to [AHCI] when you want the SATA hard disk drives to use the

AHCI (Advabced Host Controller Interface). The AHCI allows the

onboard storage driver to enable advanced Serial ATA features that

increases storage performance on random workloads by allowing

the drive to internally optimize the order of commands.

BIOS SETUP UTILITY

Advanced

Onboard Device Configuration

Onboard Devices

[Standard]

HDA Controller

[Enabled]

Front Panel Type

[HD Audio]

Realtek LAN

[Enabled]

LAN Boot ROM

[Disabled]

Onboard 1394 Controller

[Enabled]

J-Micron Controller

[IDE Mode]

Get your best

overclocking record!

“Onboard Device” is

to disable all the

unnecessary devices

when you want to

reach your best

overclocking record.

But it will keep 1

lan port alive to

submit your score.