Asus Maximus III Gene - Manual (Page 84)

3-14 Chapter 3: BIOS setup
3.3.5 CPU Ratio Setting [Auto]
Allows you to adjust the ratio between CPU Core Clock and FSB Frequency.
Use the <+> and <-> keys to adjust the value. The valid value ranges differently The valid value ranges differently
according to your CPU model.
3.3.6 CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects. Refer to section 3.5.1 CPU Configurations for details.
3.3.7 Intel(R) SpeedStep(TM) Tech [Enabled]
When set to [Disabled], the CPU runs at its default speed. When set to [Enabled],
the CPU speed is controlled by the operating system.
Configuration options: [Disabled] [Enabled]
3.3.8 Intel(R) TurboMode Tech [Enabled]
This item appears only if you set the CPU Ratio Setting item to [Auto]. Turbo
mode allows processor cores to run faster than marked frequency in specific
condition. Configuration options: [Disabled] [Enabled]
The following three items do not appear when you set the Ai Overclock Tuner
item to [Auto].
BCLK Frequency [XXX]
Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to
adjust the value. You can also type the desired value using the numeric keypad.
The values range from 80 to 500.
PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust
the PCIE frequency. The values range from 100 to 200.
DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency.
Configuration options: [Auto] [DDR3-8��MHz] [DDR3-1�66MHz] [DDR3-1333MHz]
[DDR3-16��MHz]
3.3.9 QPI Frequency [Auto]
Allows you to set the QuickPath Interconnect (QPI) frequency.
Configuration options: [Auto] [427�MHz] [48��MHz]