Asus Maximus III Gene - Manual (Page 94)

3-24 Chapter 3: BIOS setup
3.4.7 System Information
This menu gives you an overview of the general system specifications. The BIOS
automatically detects the items in this menu.
3.4.6 AHCI Configuration
This menu is the section for AHCI configuration. It appears only when you set the
item Configure SATA as from the sub-menu of SATA Configuration to [AHCI].
SATA Port1–6 [XXXX]
Displays the status of auto-detection of SATA devices.
SATA Port1 [Auto]
Allows you to select the type of device connected to the system.
Configuration options: [Auto] [Not Installed]
SMART Monitoring [Enabled]
Allows you to set the Self-Monitoring, Analysis and Reporting Technology.
Configration options: [Disabled] [Enabled]
BIOS SETUP UTILITY
Main
AHCI Settings
SATA Port1 [Not Detected]
SATA Port2 [Not Detected]
SATA Port3 [Not Detected]
SATA Port4 [Not Detected]
SATA Port5 [Not Detected]
SATA Port6 [Not Detected]
While entering setup,
BIOS auto detects
the presence of
SATA devices. This
displays the status
of auto detection of
SATA devices.
BIOS SETUP UTILITY
Main
SATA Port1
Device :Not Detected
SATA Port1 [Auto]
SMART Monitoring [Enabled]
Select the type
of devices connected
to the system.
BIOS SETUP UTILITY
Main
BIOS Information
Version : 0202
Build Date: 08/05/09
Processor
Type : Intel(R) Core(TM) i5 CPU 870
@ 2.93GHz
Speed : 2942MHz
System Memory
Usable Size : 1016MB