Asus Striker II Formula - Manual (Page 43)

ROG Striker II Formula 2-15
1. Position the fan above the pipe
and heatsink assembly.
2. Fit the fan to the grooved edge of
the heatsink.
3. Carefully push down the fan until
it snugly fits the heatsink, then
connect the fan cable.
4. The photo shows the fan installed
on the motherboard.
Optional fan on one side fins
• Plug the optional fan cable in the OPT_FAN2 connector on the
motherboard.
• Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.
2.3.4 Installing the optional fans
Install TWO optional fans when you are using a water cooler to obtain better to obtain better
heat dissipation. Installing the optional fans with an active CPU cooler will . Installing the optional fans with an active CPU cooler will
interfere with the airflow and destabilize the system.