beautypg.com

7 voltiminder led [on, 8 cpu led selection [cpu volt, 9 nb led selection [nb volt – Asus Striker II Formula User Manual

Page 104: 10 sb led selection [sb volt, 11 rog logo [enabled, 12 es selection [disabled, Voltiminder led -28, Cpu led selection -28, Nb led selection -28

background image

4-28

Chapter 4: BIOS setup

4.4.7

Voltiminder LED [ON]

Allows you to turn on/off the onboard Voltiminder LED.

Configuration options: [ON] [OFF]

4.4.8

CPU LED Selection [CPU Volt]

Allows you to switch the onboard CPU LED display between CPU voltage

[CPU Volt] and CPU PLL voltage [PLL Volt].

Configuration options: [CPU �olt] [P���� �olt]

4.4.9

NB LED Selection [NB Volt]

Allows you to switch the onboard northbridge LED display between NB Core

Voltage [NB Volt] and CPU VTT Voltage [VTT Volt].

Configuration options: [NB �olt] [�TT �olt]

4.4.10 SB LED Selection [SB Volt]

Allows you to switch the onboard southbridge LED display between SB Core

Voltage [SB Volt] and 1.2V HT Voltage [SB_HT Volt].

Configuration options: [SB �olt] [SB_HT �olt]

4.4.11 ROG Logo [Enabled]

If this item is set to [Enabled], the box labeled as Republic of Gamers on the

heatpipe assembly lights up when the system is on.

Configuration options: [�nabled] [Disabled]

4.4.12 ES Selection [Disabled]

Configuration options: [Disabled] [WO�� Disabled] [WO�� �nabled]