2 installing two sli-ready graphics cards, Installing two sli-ready graphics cards -5 – Asus Striker II Formula User Manual

Page 177

ROG Striker II Formula

6-5

6.2.2

Installing two SLI-ready graphics cards

1. Insert one graphics card into the PCIEX16_1 slot (blue) and the other into the

PCIEX16_2 slot (blue). Make sure that the cards are properly seated on the

slots.

2. Align and insert the S��I connector to the goldfingers on each graphics card.

Make sure that the connector is firmly in place.

3. Connect auxiliary power source from the power supply to he two graphics

cards separately.

4. Connect a VGA or a DVI-I cable to the graphics card/s.

We recommend that you install an additional chassis fan for better thermal

environment.