Asus TUV4X - Manual (Page 22)

22 ASUS TUV4X User’s Manual
3. HARDWARE SETUP
6) USB Device Wake-up Jumpers (3-pin USBPWR0, USBPWR1)
These jumpers allow you to enable or disable the USB wake-up feature on the
motherboard. Set these two jumpers to ENABLE if you wish to use the USB
devices to wake up the computer. This feature requires an ATX power supply
that can supply at least 2A on the +5VSB lead. The default setting for both
USBPWR0 and USBPWR1 is DISABLE.
NOTES:
1. Before setting either of these jumpers to ENABLE, make sure that you have
the appropriate power supply, otherwise the computer does not power up.
2. If you would like to enable the USB wake-up feature, choose ENABLE
for both USBPWR0 and USBPWR1 settings.
3. The total current consumed must NOT exceed the power supply capability
(+5VSB) whether under normal working conditions or in sleep mode.
3. H/W SETUP
Motherboard Settings
TUV4X USB Device Wake Up
USB_PWR0
USB_PWR1
TUV4X
®
Enable Disable
(Default)
2
3
1
2
Enable Disable
(Default)
2 3 1 2