Asus P65UP5-P6ND - Manual (Page 26)

20 ASUS P/I-P65UP5 User's Manual
III. INSTALLATION
7. IDE activity LED (IDE LED)
This connector connects to the hard disk activity indicator light on the system
cabinet.
IDE (Activity) LED
+
8. IrDA-compliant infrared module connector (IR)
This connector supports the optional wireless transmitting and receiving infra-
red module. This module mounts to a small opening on system cases that
support this feature. You must also configure the setting through BIOS setup
in Chipset Features to select whether UART2 is directed for use with COM2
or IrDA. Use the five pins (as defined by Intel) as shown on the Back View
and connect a ribbon cable from the module to the baseboard according to the
pin definitions. The ribbon cable that may be supplied may either have five or
ten pins (for other standards). If using a ten-pin ribbon cable, use only the top
five row of the ribbon cable plug.
+5V IRTX
IRRX
NC GND
Back View
Infrared Module Connector
Front View
IRRX
+5V
IRTX
NC
GND
(Connectors)
III. INST
ALLA
TION