Asus P65UP5-P6ND - Manual (Page 13)

ASUS P/I-P65UP5 User's Manual 7
III. INSTALLATION
Jumper Settings
1. On-Board Multi-I/O Selection (JP1)
You can disable the onboard Multi-I/O (floppy, serial, parallel, and IrDA) indi-
vidually through BIOS or entirely with the following jumper in order to use
your own Multi-I/O card.
Multi-I/O JP1
Enable [1-2] (Default)
Disable [2-3]
1
Multi I/O Setting (Enable / Disable)
2
3
Enable (Default) Disabled
JP1 JP1
1
2
3
2. Flash ROM Boot Block Programming (JP4)
This sets the operation mode of the boot block area of the BIOS Flash ROM to
allow programming in the Enabled position.
Programming JP4
Disabled (Protect) [1-2] (Default)
Enabled (Program) [2-3]
Boot Block Programming (Disable / Enable)
Disabled (Default)
1
2
3
JP4
Enable
JP4
1
2
3
III. INST
ALLA
TION
(Jumpers)