Asus P5NT WS - Manual (Page 87)

ASUS P5NT WS 4-23
POST Check LAN Cable [Disabled]
POST Check LAN2 Cable [Disabled]
Enables or disables checking of the LAN/LAN2 cable during the Power-On
Self-Test (POST). Configuration options: [Disabled] [Enabled]
4.4.3 CPU Configuration
This sub-menu allows you to adjust the CPU-related items. Select an item, then
press to edit.
Select Menu
Item Specific Help
CPU Configuration
CPU Type Genuine Intel(R) CPU
CPU Speed 3.20GHz
Cache RAM 1024K
CPU Multiplier [16]
CPU Internal Thermal Control [Disabled]
Limit CPUID MaxVal [Disabled]
Hyper-Threading Technology [Enabled]
4.4.2 AI NET2
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Select Menu
Item Specific Help
Enable or Disable LAN
cable check during POST.
AI NET2
POST Check LAN Cable [Disabled]
POST Check LAN2 Cable [Disabled]
Pair Status Length
LAN1(1-2) Open N/A
LAN1(3-6) Open N/A
LAN1(4-5) Open N/A
LAN1(7-8) Open N/A
LAN2(1-2) Open N/A
LAN2(3-6) Open N/A
LAN2(4-5) Open N/A
LAN2(7-8) Open N/A
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
Phoenix-Award BIOS CMOS Setup Utility
Advanced
CPU Multiplier [16]
Use the numeric keypad to enter a new value or use the <+> and <-> keys to
adjust the value. The values range from 6 to 50.
CPU Internal Thermal Control [Disabled]
Allows you to disable or set to auto the CPU Internal Thermal Control function.
When set to [Auto], the BIOS automatically checks the CPU’s capability to enable
TM or TM2 support. In TM mode, the CPU power consumption is reduced. In TM2
mode, the CPU core ratio and VID are reduced. Configuration options: [Auto]
[Disabled]