Asus P3C-S - Manual (Page 49)

ASUS P3C-L / P3C-S / P3C-LS User’s Manual 49
3. HARDWARE SETUP
Connectors
3. H/W SETUP
18) Digital Audio Interface Header (2-pin SPDIFIN/SPDIOOUT)
only with Yamaha PCI audio
This header is the digital link between the motherboard and your devices, such
as CD player, sampler, or DAT recorder. It allows the digital transmission of
audio data in SPDIF (Sony/Philips Digital Interface) format.
P3C-LS / L / S
P3C-LS/L/S Audio Digital Interface Connectors
Ground
SPDIFIN
SPDI Signal
Ground
SPDIOOUT
SPDO Signal
19) ATX Power Supply Connector (20-pin block ATXPWR)
This connector connects to an ATX power supply. The plug from the power sup-
ply will only insert in one orientation because of the different hole sizes. Find the
proper orientation and push down firmly making sure that the pins are aligned.
IMPORTANT: Make sure that your ATX power supply can supply at least 10mA
on the +5-volt standby lead (+5VSB). You may experience difficulty in power-
ing ON your system if your power supply cannot support the load. For Wake-
On-LAN support, your ATX power supply must supply at least 720mA +5VSB.
P3C-LS/L/S ATX Power Connector
ATXPWR
+3.3 Volts
-12.0 Volts
Ground
Power Supply On
Ground
Ground
Ground
-5.0 Volts
+5.0 Volts
+5.0 Volts
Power Good
+12.0 Volts
+3.3 Volts
+3.3 Volts
Ground
+5.0 Volts
Ground
+5.0 Volts
Ground
+5V Standby
P3C-LS / L / S
P ARALLEL
PORT
OPTIONAL
4 3 2 1