Asus P3C-S - Manual (Page 43)

ASUS P3C-L / P3C-S / P3C-LS User’s Manual 43
3. HARDWARE SETUP
3) Universal Serial BUS Ports 0 & 1 (Black two 4-pin USB)
Two USB ports are available for connecting USB devices.
Universal Serial Bus (USB) 2
USB 1
4) Parallel Port Connector (Burgundy 25-pin PRINTER)
You can enable the parallel port and choose the IRQ through Onboard Parallel
Port (see 4.4.2 I/O Device Configuration).
NOTE: Serial printers must be connected to the serial port.
Parallel Port (25-pin Female)
5) Serial Port Connectors (Teal/Turquoise 9-pin COM1/COM2)
One serial port is ready for a mouse or other serial devices. A second serial port is avail-
able using a serial port bracket connected from the motherboard to an expansion slot
opening. See Onboard Serial Port 1 in 4.2.2 I/O Device Configuration for settings.
COM1 COM2
Serial Ports (9-pin Male)
6) Fast-Ethernet Port Connector (RJ45) (only in LAN models)
The RJ-45 connector is optional at the time of purchase and is located on top of
the USB connecotrs. The connector allows the motherboard to connect to a Lo-
cal Area Network (LAN) through a network hub.
RJ45