Asus KCMR-D12 - Manual (Page 88)

4-30 Chapter 4: BIOS setup
4.6.5 APM Configuration
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Power On Configuration
Restore on AC Power Loss [Last State]
Resume On PCIE Wake# [Disabled]
Resume On Ring [Disabled]
Resume On RTC Alarm [Disabled]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Power
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume On PCIE Wake# [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
[Disabled] Disables the PCIE devices to generate a wake event.
[Enabled] Enables the PCIE devices to generate a wake event.
Resume On Ring [Disabled]
Allows you to enable or disable the Ring to generate a wake event.
[Disabled] Disables the Ring to generate a wake event.
[Enabled] Enables the Ring to generate a wake event.
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
Options
Power On
Power Off
Last State