Asus Maximus Extreme - Manual (Page 113)

ASUS Maximus Extreme 4-35
VCORE Voltage, CPU PLL Voltage, North Bridge Voltage,
DRAM Voltage, FSB Termination Voltage, South Bridge Voltage,
DDR3 Controller REF Voltage, SB 1.5V Voltage, 3.3V Voltage,
5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
4.7 Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press to display the sub-menu.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Boot Device Priority
Boot Settings Configuration
Security
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
first boot device.
4.7.1 Boot Device Priority
1st ~ xxth Boot Device [xxx Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
Configuration options: [xxx Drive] [Disabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
Specifies the boot
sequence from the
availabe devices.
A device enclosed
in parenthesis has
been disabled in
the corresponding
menu.
BIOS SETUP UTILITY
Main Extreme Tweaker Advanced Power Boot Tools Exit
BIOS SETUP UTILITY
Boot