Asus P4G8X User Manual
Page 90
4-26
Chapter 4: BIOS Setup
USB 2.0 Controller [Enabled]
This field allows you to enable or disable the onboard USB 2.0 controller.
Set to [Enabled] if you wish to install USB 2.0 devices. Configuration
options: [Disabled] [Enabled]
Primary VGA BIOS [PCI VGA Card]
This field allows you to select the primary graphics card. Configuration
options: [PCI VGA Card] [AGP VGA Card]
Onboard LAN [Enabled]
This field allows you to enable or disable the onboard LAN controller.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
This field allows you to enable or disable the option ROM in the onboard
LAN controller chipset. Configuration options: [Disabled] [Enabled]
If you set the Onboard LAN Boot ROM item to Enabled and rebooted
the computer, the BROADCOM MBA appears in the Other Boot
Device Select configuration options. See section “4.6 Boot Menu.”
Onboard 1394 Device [Enabled]
This field allows you to enable or disable the onboard 1394 controller.
Configuration options: [Disabled] [Enabled]
Onboard ATA Device [Enabled]
This field allows you to enable or disable the onboard ATA controller.
Configuration options: [Disabled] [Enabled]
Onboard ATA Device First [Yes]
This item allows you to select the option ROM booting sequence. Setting
to [Yes] loads the option ROM on the onboard ATA device first. Setting to
[No] loads the option ROM on the add-on card first. Configuration options:
[No] [Yes]