P4g8x infrared module connector, Ir_con – Asus P4G8X User Manual
Page 53

ASUS P4G8X series motherboard user guide
2-27
15. IEEE 1394 connectors (10-1 pin IE1394_1, IE1394_2)
(on 1394 models only)
These connectors are for the bundled 10-to-6-pin 1394 serial
connector cables that connect to the 1394 module. Attach the 10-1 pin
cable plugs to these connectors, and the 6-pin cable plugs to the 1394
module. You may also connect a 1394-compliant internal hard disk to
these connectors.
14. Infrared module connector (5-1 pin IR_CON)
This connector supports an optional wireless transmitting and receiving
infrared module. This module mounts to a small opening on system
chassis that support this feature. You must also configure the UART2
Use As parameter in BIOS to set UART2 for use with IR. See section
“4.4.2 I/O Device Configuration” for details.
Use the five pins as shown in Back View and connect a ribbon cable
from the module to the motherboard SIR connector according to the
pin definitions.
NEVER connect a USB cable to any of the IEEE 1394 connectors.
Doing so will damage the motherboard!
P4G8X
®
P4G8X Infrared Module Connector
Back View
+5V
IRTX
IRRX
(NC)
GND
Front View
IR_CON
+5V
IRRX
IR
TX
GND
1
P4G8X
®
P4G8X IEEE-1394 Connectors
IE1394_1
IE1394_2
1
GND
+12V
TPB1-
GND
TP
A1-
+12V
TPB1+
GND
TP
A1+
1
GND
+12V
TPB0-
GND
TP
A0-
+12V
TPB0+
GND
TP
A0+