Asus WL-169gE - Manual (Page 6)

ASUS WLAN Card
Quick Start Guide
English
Configuring with the WLAN utility (Ad Hoc)
The WLAN card supports Ad Hoc mode which allows communication between
wireless stations without an AP.
2..Click.the. Config button.to.set.the.WLAN.
Card.to. Ad Hoc connection mode, Set the
SSID to.that.of.the.target.Ad.Hoc.node,.
then.select.a. Channel on which the Ad Hoc
nodes.are.to.communicate..
3..Click.the. Survey.button.to.scan.for.the.Ad.
Hoc nodes. Select the node you want to
communicate with and press Connect.
4..If.the.encryption.settings.of.your.WLAN.
Card.are.different.from.those.of.the.other.
Ad.Hoc.nodes,.you.are.prompted.to.make.
the encryption of the two nodes identical.
Click. Apply to.activate.the.settings.
1. Right-click the wireless connection icon
and.select. Wireless Settings.
5..Check.the. Status.page.to.see.the.association.
state. If connection is established, the box
shows “Connected - xx:xx:xx:xx:xx:xx”.
6..Check.the. Connection.tab.to.see.the.
signal.strength..Click. OK to exit the utility.