beautypg.com

Config - basic, Quick start guide – Asus WL-169gE User Manual

Page 13

background image

12

ASUS WLAN Card

Quick Start Guide

English

Config - Basic

This.page.enables.you.to.change.the.

WLAN Card configurations.

Network Type

Infrastructure.–.Infrastructure.means.

to establish a connection with an access

point. Once connected, the access

point allows you to access wireless

LAN and wired LAN (Ethernet). The

Channel field turns to

Auto when Infrastructure.is.selected.

Ad Hoc – Ad Hoc means to communicate directly with other wireless clients

without using an access point. An “Ad Hoc” network is typically formed quickly

and easily without pre-planning. For example, share meeting notes between

attendants.in.a.meeting.room.

Network Name (SSID)

SSID stands for “Service Set Identifier”, which is a string used to identify a

wireless LAN. Use the SSID to connect with a known access point. You can

enter a new SSID or select one from the drop-down list box. If you get connected

by designating the SSID, you are only to connect the AP with the SSID you

assigned. If the AP is removed from the network, your WLAN Card does not

roam automatically to other APs. SSIDs must all be printable characters and

having a maximum of 32 case sensitive characters, such as “ Wireless”.

NOTE: Set the SSID to a null string, if you wish to allow your station to

connect to any access point it can find. But you cannot use null string in

Ad Hoc mode.

Channel

Use the Channel field to select the radio channel for WLAN Card. In an

"infrastructure" network, your WLAN Card will automatically select the correct

channel to communicate with an access point, this parameter will be fixed in

"Auto" and cannot be changed. In an "Ad Hoc" network, you can decide which

channel.to.use.for.the.WLAN.Card..With.the.same.channel.setting,.all.WLAN.

Cards can communicate with each other in the Ad-Hoc network.
The.radio.channels.you.can.use.depend.on.the.regulations.in.your.country..

For United States (FCC) and Canada (IC), channels 1 to 11 are supported. For

Europe (ETSI), channels 1 to 13 are supported. For operation in Japan (MKK),

channels.1.to.14.are.supported.