beautypg.com

2 removing the hdd module cage, 3 installing a hot-swap sata/sas hard disk drive, Removing the hdd module cage -14 – Asus TS700-E6/RS8 User Manual

Page 34: Installing a hot-swap sata/sas hard disk drive -14

background image

Chapter 2: Hardware setup

2-14

2.6.3

Installing a hot-swap SATA/SAS hard disk drive

1. Release a drive tray by pushing the

spring lock to the right, and then

pulling the tray lever outward. The

drive tray ejects slightly after you

pull out the lever.

2.6.2

Removing the HDD module cage

1. Disconnect the all cables from the SATA/SAS backplane on the HDD module

cage.

2. Level the HDD module cage latch

counterclockwise. The HDD module

cage will be pushed out of the

chassis.

2

3. Completely pull out the HDD module

cage.

See also other documents in the category Asus Computer hardware: