Asus TS700-E6/RS8 - Manual (Page 27)

2-7 ASUS TS700-E6/RS8
2.2.2 Installing the CPU heatsink and fan
To install the CPU heatsink and fan:
1. Place the CPU heatsink and fan on
top of the installed CPU, ensuring
that the four screws match the holes
on the support plate, and the arrow
on the fan faces to rear panel of the
server chassis.
2. Twist each of the four screws with
a Philips (cross) screwdriver just
enough to attach the CPU heatsink
and fan to the motherboard. When
the four screws are attached,
tighten them one by one to
completely secure the CPU
heatsink and fan.
3. Connect the CPU heatsink and
fan cable to the connector on the
motherboard.
Do not forget to connect
the CPU heatsink and fan
connector! Hardware monitoring
errors can occur if you fail to
plug this connector.