beautypg.com

2 cpu configuration, Ratio cmos setting [ 14, Vid cmos setting [ 62 – Asus P5GC-VM User Manual

Page 68: Microcode updation [enabled, Max cpuid value limit [disabled, Execute disable function [disabled

background image

2-20

Chapter 2: BIOS setup

2.4.2

CPU Configuration

The items in this menu show the CPU-related information that the BIOS

automatically detects.

Ratio CMOS Setting [ 14]

Sets the ratio between the CPU Core Clock and the Front Side Bus frequency.

The default value of this item is auto-detected by BIOS. Use the <+> or <-> keys to

adjust the values.

VID CMOS Setting [ 62]

Allows you to set the VID CMOS setting at which the processor is to run. The BIOS

auto-detects the default value of this item. Use the <+> or <-> keys to adjust the

values.

Microcode Updation [Enabled]

Allows you to enable or disable the microcode updation.

Configuration options: [Disabled] [Enabled]

Max CPUID Value Limit [Disabled]

Enable this item to boot legacy operating systems that cannot support CPUs with

extended CPUID functions. Configuration options: [Disabled] [Enabled]

Execute Disable Function [Disabled]

Enables or disables the Execute Disable function. This item appears only

when you install a processor with the Execute Disable function.

Configuration options: [Disabled] [Enabled]

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Configure advanced CPU settings

Manufacturer: Intel

Brand String: Genuine Intel(R) CPU 2.80GHz

Frequency : 2800MHz

FSB Speed : 800MHz

Cache L1 : 16 KB

Cache L2 : 2048 KB

Cache L3 : 0 KB

Ratio Status: Unlocked (Max:14, Min:14)

Ratio Actual Value : 14

Ratio CMOS Setting:

[

14

]

VID CMOS Setting:

[ 62]

Microcode Updation

[Enabled]

Max CPUID Value Limit

[Disabled]

Execute Disable Function

[Disabled]

CPU Internal Thermal Control

[Auto]

Sets the ratio between

CPU Core Clock and the

FSB Frequency.

NOTE: If an invalid

ratio is set in CMOS

then actual and

setpoint values may

differ.

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit