Asus K8N-DRE - Manual (Page 131)

A S U S K 8 N - D R E A S U S K 8 N - D R E A S U S K 8 N - D R E A S U S K 8 N - D R E A S U S K 8 N - D R E 6 - 1 6 - 1 6 - 1 6 - 1 6 - 1
6.1 RAID driver installation
After creating the RAID sets for your server system, you are now ready to
install an operating system to the independent hard disk drive or bootable
array. This part provides instructions on how to install the RAID controller
drivers during OS installation.
Creating a RAID driver disk Creating a RAID driver disk Creating a RAID driver disk Creating a RAID driver disk Creating a RAID driver disk
You may have to use another system to create the RAID driver disk from
the system/motherboard support CD or from the Internet.
The Makedisk menu appears.
Loading FreeDOS FAT KERNEL GO!
Press any key to boot from CDROM...
A floppy disk with the RAID driver is required when installing Windows ®
2000/XP operating system on a hard disk drive that is included in a RAID
set. You can create a RAID driver disk in DOS (using the Makedisk
application in the support CD) or in Windows
® environment.
To create a RAID driver disk in DOS:
1. Place the motherboard support CD in the optical drive.
2. Restart the computer, then enter the BIOS Setup.
3. Select the optical drive as the first boot priority to boot from the
support CD. Save your changes, then exit the BIOS Setup.
4. When prompted, press any key to boot from the support CD.
5. Place a blank, high-density floppy disk to the floppy disk drive.
a) FreeDOS command prompt
b) Create NVIDIA nForce(TM) PATARAID Driver for Win2K/2K3 32 bit driver
c) Create NVIDIA nForce(TM) SATARAID Driver for Win2K/2K3 32 bit driver
d) Create NVIDIA nForce(TM) PATARAID Driver for Win2K3 64 bit driver
e) Create NVIDIA nForce(TM) SATARAID Driver for Win2K3 64 bit driver
For K8N-DRE/SCSI MB only:
f) Create LSI Logic Fusion-MPT MiniPort for Win2K 32 bit driver
g) Create LSI Logic Fusion-MPT MiniPort for Win2K3 32 bit driver
h) Create LSI Logic Fusion-MPT MiniPort for RH3.OAS driver
Please choose a ~ h:
When you insert a floppy disk with data, the utility erases all the data
before copying the RAID drivers.