Asus K8N-DRE - Manual (Page 110)

5 - 1 2 5 - 1 2 5 - 1 2 5 - 1 2 5 - 1 2 C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n
5.3.1 5.3.1 5.3.1 5.3.1 5.3.1 Boot Adapter List Boot Adapter List Boot Adapter List Boot Adapter List Boot Adapter List
The B o o t A d a p t e r L i s t B o o t A d a p t e r L i s t B o o t A d a p t e r L i s t B o o t A d a p t e r L i s t B o o t A d a p t e r L i s t tab allows you to select and configure the SCSI
controller, create arrays, and arrange the sequence of available boot
adapters.
Changing the adapter boot sequence Changing the adapter boot sequence Changing the adapter boot sequence Changing the adapter boot sequence Changing the adapter boot sequence
To change the adapter boot sequence:
1. Select the adapter from the list (1020/1030), then press .
The screen displays the selected adapter’s properties. Refer to the
table below for a description of the properties.
2. Move the selection to the B o o t O r d e r B o o t O r d e r B o o t O r d e r B o o t O r d e r B o o t O r d e r column, then press the <+>
or <-> key to adjust the adapter boot sequence.
P r o p e r t y P r o p e r t y P r o p e r t y P r o p e r t y P r o p e r t y D e s c r i p t i o n D e s c r i p t i o n D e s c r i p t i o n D e s c r i p t i o n D e s c r i p t i o n
A d a p t e r A d a p t e r A d a p t e r A d a p t e r A d a p t e r Identifies the specific family of LSI Logic Host Adapters.
P C I B u s P C I B u s P C I B u s P C I B u s P C I B u s Identifies the PCI Bus number assigned by the system BIOS to an
adapter (range 0x00 - 0xFF, 0 - 255 decimal).
D e v / F u n c D e v / F u n c D e v / F u n c D e v / F u n c D e v / F u n c Identifies the PCI Device/Function assigned by the system BIOS
to the selected adapter.
B o o t O r d e r B o o t O r d e r B o o t O r d e r B o o t O r d e r B o o t O r d e r Identifies the relative boot order (0 to 3) of an adapter. The
Fusion-MPT SCSI BIOS traverses up to four adapters in the
specified order in search of bootable media. Access the “Boot
Adapter List” Menu to modify this item.
3. When finished, press to open the A d a p t e r P r o p e r t i e s A d a p t e r P r o p e r t i e s A d a p t e r P r o p e r t i e s A d a p t e r P r o p e r t i e s A d a p t e r P r o p e r t i e s
screen; otherwise, press to exit the utility.