Asus K8N-DRE - Manual (Page 106)

5 - 8 5 - 8 5 - 8 5 - 8 5 - 8 C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n
5.2.5 5.2.5 5.2.5 5.2.5 5.2.5 Rebuilding a RAID set Rebuilding a RAID set Rebuilding a RAID set Rebuilding a RAID set Rebuilding a RAID set
To rebuild a RAID set:
1. From the A r r a y L i s t A r r a y L i s t A r r a y L i s t A r r a y L i s t A r r a y L i s t, use the up or down arrow keys to select the
RAID set you want to rebuild, then press . The RAID set details
appear.
2. Press .
3. Use the up or down arrow keys to select a the RAID set you want to
rebuild, then press . A confirmation message appears.
4. Press to start rebuilding the array, or
to cancel. The A r r a y L i s t
A r r a y L i s t A r r a y L i s t A r r a y L i s t A r r a y L i s t screen
displays the RAID set after rebuilding.
Rebuild array?
[Enter] OK [Esc] Cancel
[Ctrl-X]Exit [
↑↓ ↑↓ ↑↓ ↑↓ ↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail
NVIDIA RAID Utility Oct 5 2004
- Array List -
Boot Id Status Vendor Array Model Name
No 4 Healthy NVIDIA STRIPING XXX.XXG
No 3 Healthy NVIDIA MIRRORING XXX.XXG
[
↑↓] Select [F6] Back [F7] Finish
Array 1 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Striping
Striping Width: 1 Striping Block: 64K
Adapt Channel M/S Index Disk Model Name Capacity
2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB
1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB