Asus K8N-DRE - Manual (Page 122)

5 - 2 4 5 - 2 4 5 - 2 4 5 - 2 4 5 - 2 4 C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n
2. After selecting the drives, press .
3. When prompted, select , then
press to create the RAID 0 set.
5.3.5 5.3.5 5.3.5 5.3.5 5.3.5 Creating a RAID 0 (Stripe) set Creating a RAID 0 (Stripe) set Creating a RAID 0 (Stripe) set Creating a RAID 0 (Stripe) set Creating a RAID 0 (Stripe) set
You can create a RAID 0 (striped array) using the LSI Logic Configuration
Utility.
To create a RAID 0 set:
1. From the R A I D P r o p e r t i e s R A I D P r o p e r t i e s R A I D P r o p e r t i e s R A I D P r o p e r t i e s R A I D P r o p e r t i e s screen, select the drives that you want
to include in the RAID 0 set.
The A r r a y
A r r a y A r r a y A r r a y A r r a y label on top of the screen changes to IS (Integrated
Striping).