Asus B and W PCI CARD - Manual (Page 89)

88 ASUS SpaceLink B&W PCI Card
Chapter 5 - Troubleshooting
Chapter 5
Properties section of the dialog box, the fourth entry, Device Address, is the
BDA of the selected Bluetooth device.
Determine the HCI version number
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device
Properties section, the fifth entry provides Bluetooth Specification compliance
information for the Host Controller Interface.
The sixth entry contains the Specification Revision information for the Host
Controller Interface, if appropriate.
Determine the LMP version number
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device
Properties section, the seventh entry provides Link Manager Protocol version
number information.
The eighth entry contains the Link Manager Protocol subversion number
information, if appropriate.
Determine hardware information
In the Bluetooth Configuration Panel, select the Hardware tab. (To access the
Bluetooth Configuration Panel: From the Windows System Tray, Right-click
the Bluetooth icon | Click Setup | Select Configuration from the fly-out menu.)
Test a Network Access connection
If the client is hardwired to the LAN, unplug the hardwired connection to
ensure that the test checks the wireless connection rather than the hardwired
connection.
If the server has access to the Internet, open a browser on the client and connect
to the World Wide Web.
You may also Ping the server from the DOS prompt.
Unknown Port error
The “Unknown Port” error message usually means an attempt was made to
connect a port that was in use.
Additional Bluetooth Serial Ports can be added if they are required.