Asus B and W PCI CARD - Manual (Page 17)

16 ASUS SpaceLink B&W PCI Card
Chapter 2 - Installation
Chapter 2
2.2 Installing the ASUS SpaceLink B&W PCI Card
1. Turn OFF your computer and open your computer chassis.
2. Insert the ASUS SpaceLink B&W PCI Card into a PCI slot.
3. Connect the provided short USB 2.0 cable from the ASUS SpaceLink
B&W PCI Card (USB 2.0 IN) to the USB 2.0 OUT header on the moth-
erboard or USB 2.0 PCI expansion card. You can use the USB 2.0 port
by connecting your motherboard’s USB bracket (not included) to the
USB 2.0 OUT on the ASUS SpaceLink B&W PCI Card.
4. Attach the antenna to the ASUS SpaceLink B&W PCI Card as shown.
USB 2.0 Out
Short USB 2.0 Cable
(Color coded plugs)
USB 2.0 Out
(Blue on card)
USB 2.0 Out (Blue
on motherboard)
USB 2.0 In
(Yellow on card)
Color Coded Plugs
USB 2.0 connectors and cable are color coded. Connect the same color plug to
the same color connectors.
USB P2 + USB Power Ground Over Current
USB Power
USB P1 – USB P1+
Ground
USB P2 –