Q-Tech QTV722 Square Wave - Manual (Page 6)

QTV721 and QTV722 Square-
Wave
REV.
Q-TECH Corporation
10150 W. Jefferson Blvd.
Culver City, CA 90232
SIZE
A
CAGE NO.
51774
Sheet 6 of 8 1.0
inspection lot codes under which devices are manufactured and tested so that revisions can be
identified.
3.6.2. Technical Data Package. When required by the purchase order, the following design documentation
and information is deliverable 30 days prior to the start of production. The Technical Data Package
shall consist of the following:
a) Assembly drawing(s).
b) All electrical schematics and drawings not considered proprietary.
c) The assembly and screening travelers to be used on-line to manufacture the devices
supplied to this specification.
d) Parts and materials list.
3.7 Test Report
A test report is supplied with each shipment of oscillators and includes the following information, as a
minimum:
a) A Certificate of Conformance to all specifications and purchase order requirements. As a
minimum, the Certificate of Conformance shall include the following information:
Purchase order number
Applicable part number
Manufacturer’s lot number
Lot date code
b) Parts and materials traceability information.
c) Certificate of crystal sweeping.
d) Manufacturing lot traveler.
e) Screening attributes and variables data as applicable.
f) Quality conformance inspection attributes and variables data as applicable.
g) Radiographic inspection negatives.
3.8 Engineering Models
Engineering Models are fit, form, and function representative of Flight Models and of commercial
construction using commercial parts of same generic type as Flight Models. Completed oscillators are
not screened.
NOTES:
This oscillator is offered to meet the specifications above and is not guaranteed to meet any
other requirements.