Q-Tech QCC325 - Manual (Page 2)

2
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
QCC325 (Revision F, August 2010) (ECO# 9911)
Electrical Characteristics
QCC325 SERIES
LOW PROFILE 5 x 3.2mm MINIATURE SMD CRYSTAL OSCILLATORS
1.8 to 5.0Vdc - 1MHz to 220.000MHz
Parameters QCC325 QCC325L QCC325N QCC325R
Output frequency range (Fo) 1MHz — 106.250MHz 1MHz — 220.000MHz 1MHz — 220.000MHz 1MHz — 165.000MHz
Supply voltage (Vdd) 5.0Vdc ± 10% 3.3Vdc ± 10% 2.5Vdc ± 10% 1.8Vdc ± 10%
Maximum Applied Voltage (Vdd max.) -0.5 to +7.0Vdc -0.5 to +5.0Vdc
Frequency stability (∆F/∆T) ± 50ppm max.
Operating temperature (Topr) -40ºC to +85ºC
Storage temperature (Tsto) -55ºC to + 125ºC
Operating supply current
(No Load) 35 mA max. - 1MHz ~ < 32MHz
70 mA max. - 32MHz ~ < 70MHz
90 mA max. - 70MHz ~ 106.250MHz 20 mA max. - 1MHz ~ < 32MHz
45 mA max. - 32MHz ~ < 70MHz
100 mA max. - 70MHz ~ 220.000MHz
8 mA max. - 1MHz ~ < 30MHz
22 mA max. - 30MHz ~ < 60MHz
70 mA max. - 60MHz ~ 220.000MHz
7 mA max. - 1MHz ~ < 30MHz
18 mA max. - 30MHz ~ < 70MHz
61 mA max - 70MHz ~ 165MHz
Symmetry
(50% of ouput waveform ) 45/55%
Rise and Fall times 10ns max. - 1MHz ~ < 20MHz
7ns max. - 20MHz ~ 106.250MHz
(between 10% to 90%)
8ns max. - 1MHz ~ < 20MHz
5ns max. - 20MHz ~ 220.000MHz
(between 10% to 90%)
6ns max.
(between 20% to 80%)
Output Load 30pF max. 1MHz ~ < 50MHz
15pF max. (50MHz ~ 106.250MHz)
15pF max. 15pF max.
Start-up time (Tstup) 10ms max.
Output voltage (Voh/Vol) 0.9Vdd min. / 0.1Vdd max.
Output Current (Ioh/Iol) ± 16mA max. ± 8mA max. ± 6mA max.
Enable/Disable function Pin 1 VIH ≥ 2.2V Active VIH ≥ 2.2V Active (< 30MHz)
VIH ≥ 0.7Vdd Active (≥ 30MHz)
VIH ≥ 0.7Vdd Active
VIL ≤ 0.8V High Z VIL ≤ 0.8V High Z (< 30MHz)
VIL ≤ 0.3Vdd High Z (≥ 30MHz)
VIL ≤ 0.3Vdd High Z
Aging ± 5ppm/year max.
Q-TECH
CORPORATION