Q-Tech CLASS B+ - Manual (Page 14)

Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
14 of 27
Q-TECH
CORPORATION
QPDS-0001, Rev L, June 2013 (ECO #10851)
CLASS B+ PRODUCTS
HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS
2.5 to 5.0Vdc - 15kHz to 350MHz
Electrical Parameter Test Conditions
Limits
Notes
Min. Nom. Max. Units
Frequency Range
+2.5Vdc
40 133
MHz
DIP, FP20
70 133 DIP, FP16, FP20
+3.3Vdc
70 165 All Ceramic Packages
70 200 DIP, FP16, FP20
Frequency/Temperature Stability See temperature codes -55 +25 +125 °C (See Note 1)
Supply Voltage 3.0 3.3 3.63 Vdc
Input Current
Measured without load
at maximum Vdd
30
40
50
mA
40M-<100MHz
100M-<130MHz
130M-200MHz
Output Voltage VOL Vdd x 0.1 Vdc
Output Voltage VOH Vdd x 0.9 Vdc
Output Waveform Square Wave N/A
Rise and Fall Time 10% to 90% 3 ns
Duty Cycle 50% of output 40 60 %
Load 15pF//10kΩ
Frequency Aging after 30 days 70°C±3°C
±1.5
±2
ppm
ppm
40M-150MHz
>150M-200MHz
(See Note 2)
Frequency Aging/Year 70°C±3°C ±5 ppm (See Note 3)
Start-up Time 100µs ramp 10 ms
Output Enable VIH 2.2 Vdc
Output Disable VIL 0.8 Vdc Output High Impedance
Frequency Voltage Tolerance
over ±10% change
in supply voltage
-2 +2
ppm
DIP, FP16, FP20
-4 +4 All Ceramic Packages
Electrical Performance Characteristics 40MHz to 200MHz
(For BiCMOS +2.5Vdc, +3.3Vdc CMOS Ouputs)
NOTES:
1. Frequency stability compared to nominal frequency including initial accuracy at 25°C, load, and supply variations ±10%.
2. Normally frequency aging is up 30 days. However, aging may be ceased if value at 15 days is half than the limit of 30-day aging
value, or continued up to 90 days if value exeeds 30 day aging limit.
3. Aging is ±5ppm after first year and ±2ppm/year thereafter.
Parameters Symbol Min. Max. Units
Supply Voltage Vdd -0.5 +5 V
Operating Temperature Top. -55 +125 °C
Storage Temperature Tstg -62 +125 °C
Lead Solder Temperature 260/10 °C/seconds
Package Thermal Resistance ѲJc 50 °C/W
Junction Temperature +150 ºC
Maximum Ratings
Recommended Operating Conditions