OSRAM LS__PD LI Analog - Manual (Page 9)

9
3 Operation, settings
Use of the sensor and configuration in the system  separate manual for the control unit used.
Setting the detection range for presence detection
In order to use the presence detection in a targeted way, the detection range of the sensor can/
must be set independently of the spatial conditions
 7 .
1. Remove/insert or rotate one or both shutters where necessary.
2. By changing the shutter position, you can influence the detection range of the sensor direc-
tionally in order to prevent undesired presence detection.
4 Technical data
Cable connection 4p4c, max. total cable length 25 m
Ambient temperature -20 °C to +50 °C (operation)
Max. cable length, sensor 25 m, ensure contact assignment 1:1
for extension/shortening
Working range, light sensor 20 - 800 lux (directly on the sensor)
Protection class IP20
CE conformity EMC acc. to EN 61547; low voltage acc. to EN 60928
Installation height max. 5.0 m
Detection range max. Ø 7.0 m
Detection angle 40° - 90°
Detection range adjustable via shutter (min. 40° - max. 90°)
Installation height 2.0 m
Installation height 2.5 m
Installation height 3.0 m
Installation height 3.5 m
Max. installation height 5.0 m
Detection range Ø 1.5 m - 4.0 m
Detection range Ø 1.8 m - 5.0 m
Detection range Ø 2.0 m - 6.0 m
Detection range Ø 2.5 m - 7.0 m
Max. detection range Ø 7.0 m