OSRAM LS__PD MULTI 3 B - Manual (Page 2)

Fitting (cont.)
80° 80°
H
I
K
L
> h
h
Selecting the installation location
H Surveillance cone: entire workplace; not on window sur-
faces.
I Avoid exposure to direct light.
K Avoid drafts (e.g. from ventilators or fans).
L Installation distance = min. installation height
Adjusting the detection area
Tilt the motion sensor up to 30° in the required direction.
Appendix
Technical data
Combined control and
supply connection
4-pin modular connection (4p4c)
1: Supply voltage
2: Light measurement value
3: Motion signal
4: Signal ground
Length 2.1 m
Maximum total length
of signal line (incl. all
connections to the
control units)
See control unit
Insulation Basic insulation as per IEC 664
Dimensions
(L x W x H)
48 x 29 x 24.5 mm
Light sensor detection
area
20 - 600 lx (measured at sensor),
opening angle approx. 90°
Motion detection area Conical, opening angle approx. 80°
Installation height 2 - 4 m
The CE requirements to EN 60928 are fulfilled.
The EMC requirements to EN 61547 are fulfilled.
Conformity with the relevant EU directives is
confirmed by the CE symbol.