SENA Serial_IPTM Redirector 4.3 - Manual (Page 54)

1. In the Control Panel,
click the Advanced
button to get the
Advanced Settings
dialog window.
2. Select the Encryption
tab.
3. In the Encryption
Strength group, select
Minimum and
Maximum strengths in
their respective
dropdown lists. The
highest value available
for Maximum is limited
by the product license
key used to install this
copy of the software.
4. In the Encryption
Ciphers group, select
one or more cipher
suites.
5. Verify that at least one cipher appears in the Cipher Set Preview display. These are the available cipher
sets that the software can use when negotiating a network connection. Their order of appearance is not
significant.
The cipher being used in a connection is displayed in the Port Monitor window.
Available Cipher Sets
Following are all of the cipher sets that the Encryption feature may use:
DHE-RSA-AES256-SHA EXP-EDH-DSS-DES-CBC-SHA
DHE-DSS-AES256-SHA DES-CBC-SHA
AES128-SHA EXP-DES-CBC-SHA
EDH-RSA-DES-CBC3-SHA EXP1024-RC2-CBC-MD5
EDH-DSS-DES-CBC3-SHA EXP-RC2-CBC-MD5
DES-CBC3-SHA DHE-DSS-RC4-SHA
EXP1024-DHE-DSS-DES-CBC-SHA EXP1024-DHE-DSS-RC4-SHA
EXP1024-DES-CBC-SHA EXP1024-RC4-SHA
EDH-RSA-DES-CBC-SHA EXP1024-RC4-MD5
EXP-EDH-RSA-DES-CBC-SHA RC4-SHA RC4-MD5
EDH-DSS-DES-CBC-SHA EXP-RC4-MD5