Ocean Optics Jaz Absolute Irradiance - Manual (Page 12)

2: Calibration
6 JAZ-A-IRRAD-02-201011
8. Set the spectrometer for the optimal signal-to-noise ratio by clicking Set Automatically or
making the following individual selections:
 Integration Time: The peak of the signal should be close to 55,704 counts without saturation
of the detector (peak > 64,000 counts).
 Scans to Average: 30
 Boxcar width: Leave setting at 5.
Click Next when settings have been selected.
9. Click to take a reference measurement. This data will be compared with the calibrated data of
your light source. Click Next.