Ocean Optics Remora - Manual (Page 38)

A: Troubleshooting
32 027-10000-000-02-0809
Note
If you get the following page instead, then you are running the latest version of the
firmware:
2. If you want to re-flash your Remora, make sure the Remora is not currently performing any
functions (e.g., communicating with SpectraSuite), disconnect any spectrometers from the
Remora, and then click the Reflash button. The following page appears:
Caution
Do not power off the Remora or disconnect the Ethernet cable (if using wired
Ethernet) while it is re-flashing. Doing so can make your Remora non-operational.
3. When the unit is finished re-programming, the Ethernet lights go out indicating that the device is
ready to be rebooted. Reboot the Remora.