Ocean Optics Remora - Manual (Page 24)

2: Installing Remora
18 027-10000-000-02-0809
5. Following the directions on the page, disconnect the Remora from your computer, plug the
Remora into your LAN (or make sure it is within range of the Wireless Access Point if using Wi-
Fi), and reboot the Remora. Wait at least two full minutes for the Remora to boot up.
6. Once the Remora has booted up, you can unplug the Remora from the LAN, connect the Remora
back to your computer with the Ethernet cable, and go to the following address to view the
DHCP-assigned address(es):
http://192.168.7.5/network.html .You should see a Network Status
page that looks similar to this: