Littelfuse 392 Series - Manual (Page 3)

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Radial Lead Fuses
TE5 ® > Time-Lag > 392 Series
Materials
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Lead Pull Strength 10 N (IEC 60068-2-21)
Solderability
260ºC, ≤ 3 sec. (Wave)
350ºC, ≤ 3 sec. (Soldering iron)
Soldering Heat
Resistance 260ºC, 10 sec. (IEC 60068-2-20)
350ºC, ≤ 3 sec. (Soldering iron)
Product Characteristics
Operating Temperature –40ºC to +85ºC (consider de-rating)
Climatic Category
–40ºC to +85ºC/21 days
(EN 60068-1, -2-1, -2-2, -2-78)
Stock Condition
+10 ºC to +60 ºC
Relative humidity ≤ 75% yearly
average, without dew, maximum
value for 30 days - 95%
Vibration Resistance
24 cycles at 15 min. each
(EN 60068-2-6)
10–60 Hz at 0.75 mm amplitude
60–2000 Hz at 10 g acceleration
Dimensions
8.5
0.5 min
max. 8
L
0.6
5.08
Holes in the printed circuit board
1 +0.1
1.5
max.4
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
packaging Option packaging Specification Quantity
Quantity &
packaging Code
Taping Width
Tape & Ammopack N/A 1,400 0000 N/A
Short Leads N/A 1,400 0440 N/A
0000 392 xxxx
Packaging Code
Amp Code
Series
0000 Tape/Ammopack (1,400 pcs.)
0440 Short Leads - Bulk (1,400 pcs.)
Refer to Amp Code column of
Electrical Characteristics Table
Part Numbering System