Littelfuse 395 Series - Manual (Page 3)

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Radial Lead Fuses
TE5 ® > Fast-Acting > 395 Series
Materials
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Lead Pull Strength 10 N (IEC 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance 260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Product Characteristics
Operating Temperature -40ºC to +85ºC (consider de-rating)
Climatic Category
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-2-78)
Stock Conditions
+10 ºC to +60 ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30 days-
95%
Vibration Resistance
24 cycles at 15 min. each
(EN 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Dimensions
8,5
0,5 min
max.
8
L
Æ 0,6
5,08
Holes in the printed circuit board
1 +0,1
1,5
max.4
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Part Numbering System
Packaging
packaging Option packaging Specification Quantity
Quantity &
packaging Code
Taping Width
395 Series
Tape & Ammopack N/A 1,400 0000 N/A
Short Leads N/A 1,400 0440 N/A
0000 395 xxxx
Packaging Code
Amp Code
Series
0000 Tape/Ammopack (1,400 pcs.)
0440 Short Leads - Bulk (1,400 pcs.)
Refer to Amp Code column of
Electrical Characteristics Table